Haberler - KraftCuring

Shooting of a Marketing Film in England

Eylül 21, 2023

Bridge Beam Manufacturing For HS2: A Behind-the-Scenes Look In the town of Melton Mowbray, a joint venture is taking place at the FTB facility. This…

Proje

Customer Service: The Art of Giving People More than They Expect

Nisan 17, 2023

Visiting a good restaurant quickly loses its appeal if the service is incompetent and unmotivated or even noticeably absent. But of course, bad service is…

Proje

Accelerated Concrete Curing using Radiant Heat

Nisan 17, 2023

Growth in metropolitan areas and their inhabitants’ demand for rapid transportation present many of the world's major cities with extensive infrastructural challenges. Tunnels, constructed with…

Proje

A Green Way to Cure Concrete

Nisan 17, 2023

Climate change, sustainability, global warming and CO2 are on people's minds all over the world, regardless of the industry, and this will not change in…

Proje

The Müller-Steinag Group increases production capacity with a new concrete curing system

Aralık 13, 2021

(Article in CPI – Concrete Plant International – 6 | 2021) At the Rickenbach site, the Müller-Steinag Group operates two self-sufficient concrete block lines in…

Proje

Kann GmbH invests in the future with a modern curing chamber

Aralık 13, 2021

(Article in CPI – Concrete Plant International – 5 | 2021) Kann GmbH Baustoffwerke, with its headquarters in Bendorf-Mühlhofen and a total of 20 other…

Proje

Turn-Key Installation for a brand new Quadrix® System

Temmuz 7, 2021

Last week, Kraft Curing began another turn-key installation of a large project for a manufacturer of concrete hardscape products (pavers, curbs, and blocks) in Germany.…

Proje

The perfect accompaniment to a carousel concrete wall production plant.

Ocak 27, 2021

One of India's largest precast property developers is now adding three additional Convect-Air systems to their already extensive catalogue of Kraft Equipment. The three sets…

Proje

And off we go to India!

Kasım 25, 2020

This 2 year old, reconditioned Vapor Generator will now embark on the long journey to it's new owner in India, simply taking its home with…

Proje

Prioritized Coordination of Engineering and Production Departments to Slash Delivery Time

Kasım 20, 2020

The Kraft Curing team quickly rolled up their sleeves after receiving this rush order from the USA for a 94% efficient 1400 kWh ThermalCure hydronic…

Proje

Installation of a true rarity!

Kasım 16, 2020

The QUADRIX ULTRA at Tobermore Concrete Productions Ltd. in the UK is completely finished now and will in the future accelerate the hardening process, thus…

Proje

Everything shines new!

Kasım 13, 2020

This valued customer in Poland just took delivery a complete QUADRIX® curing package. This includes our QUADRIX® air-heating and circulation unit, AutoCure® curing controls, AutoFog®…

Technology

Take Control from Anywhere – With Access Anywhere!

Mayıs 26, 2020

Enhance your AutoCure® control with Access Anywhere and become mobile! The ACCESS ANYWHERE interface connects your concrete curing facility with up-to-date communication devices including PCs, tablets…

Proje

A long-lasting and successful partnership

Şubat 1, 2020

Kilsaran International, a family-owned Irish company based near Dublin in Piercetown, County Meath, has been an international byword for innovative concrete and asphalt products for…

Technology

Vapor is better than Steam

Ocak 14, 2020

Why does a vapor generator have no flue?How is vapor actually produced without boiling water?Why is vapor better for your concrete - and your bank…

Company News

Özel okul için sponsorluk

Aralık 3, 2019

KRAFT 2019 okul sporları yardımına katkıda bulundu. Diğer yerel şirketlerle birlikte, yerel Maximilian-Kolbe-School'umuzu, 2019 okul sporları yardımcısı kapsamında, oyun ve öğrenme materyallerinin sponsor olarak satın…

Company News

OPENING OF NEW KRAFT BUILDING IN LINDERN

Kasım 15, 2019

On Friday, November 15, 2019, the new production hall with office building was officially opened at KRAFT CURING in Lindern at a ceremony attended by…

Technology

Temperature difference in the chamber – the enemy of quality

Eylül 3, 2019

Different climate zones in curing chambers are more the norm than the exception. They cause color differences and problems in the strength of concrete products.…

Technology

Ecological layer securement and surface protection with biodegradable material

Temmuz 8, 2019

Modern architecture places ever higher demands on the production of terrace slabs and concrete paving stones. The storage and transport of such high-quality slabs is…

Technology

Thermal images help assessing insulation issues in curing chambers

Mayıs 2, 2019

Due to its lower capital cost, low energy and maintenance costs and highly positive impact on the consistency of concrete color, strength and durability, the…

Technology

Newly developed shelf design provides for a durable connection and secure operation

Mart 4, 2019

Investing in a curing rack means relying on years and years of uninterrupted service in order to achieve the neccessary return-on-investment. Every breakdown, any damage…

Technology

“Made in Germany” curing rack with computer-optimised design and integrated curing climate control

Mayıs 18, 2018

“Concrete should be cured, not dried.” Kraft, located in Lindern in Lower Saxony, have consistently followed this principle for over 25 years and committed their…

General

Benefits of the innovative QUADRIX® Curing Technology

Ekim 1, 2017

For producers of concrete pavers and blocks, switching to a Single Atmsophere Curing Chamber (Big Room) offer substantial benefits. A factual, indepth and informative dissertation,…

Proje

Heating Concrete in the Desert

Nisan 1, 2017

In 2015, one of the leading producers of precast concrete products in the United Arab Emirates, Hi-Tech Concrete Products, installed a ThermalCure® Accelerated Concrete Curing…

Proje

Accelerated Concrete Tunnel Segment Curing for the Albvorland Tunnel

Mart 15, 2017

For the Stuttgart-Ulm railway project a new high-speed section is being built from Wendlingen (Neckar) to Ulm alongside the A8 motorway. The new section will…

General

Concrete pavers with triple protection

Ocak 1, 2017

Gerwing revised and optimized numerous processes in their concrete block paving production in order to achieve the desired result, which is now marketed under the…

Proje

Heinrich & Bock rely on controlled concrete curing

Haziran 1, 2016

KRAFT’s challenge in the Wittenheim plant, which Heinrich & Bock had owned since 1998, was to create a consistent day-to-day climate in the large volume…

Proje

Low-emissions curing system offers significant cost savings

Nisan 1, 2016

In April 2013, Sovereign Concrete of Australia contacted KRAFT CURING SYSTEMS to replace an outdated boiler system. In compliance with local standards and Sovereign’s unique…

Proje

Quality increase and cost reduction by controlled concrete curing conditions

Şubat 1, 2016

The goal of every producer must be to produce the lowest cost product, available within 24 hours, with consistent and bright colors, without efflorescence and…

Proje

Accelerated concrete hardening system ensures consistent climatic conditions in a single atmosphere chamber throughout the year

Ocak 1, 2016

"The impossible has become possible – now we can produce in three shifts." Those were the words of the regional director for production, Mr. Paweł…

Proje

CityStoneDesign: Reaching higher quality standards through curing

Mayıs 1, 2015

“With CityStoneDesign, we emphasize new exciting products as well as product quality through extraordinary aesthetics paired with technological excellence and functionality”, says Peter Bozek, CityStoneDesign…

Proje

Van Dyk Stene invests in fully automated concrete products plant with integrated curing system

Nisan 1, 2015

The newly commissioned Van Dyk Stene concrete products plant in Vredenburg in the Western Cape is saving the company 30% on its total cement input…

Proje

Kilsaran Group invests in new curing technology

Mart 1, 2015

To keep up with market demand for high quality products, Kilsaran Group (located in Dublin, Ireland) opted for KRAFT's Quadrix® Accelerated Concrete Curing Systems to…

Proje

Remote overnight concrete curing for bridge elements

Ocak 1, 2015

For the densely populated state of New York the Tappan Zee Bridge, crossing the Hudson river north of the city of New York constitutes a…

Proje

Concrete curing system installed during operation

Aralık 1, 2014

On the occasion of the anniversary, the company Bruk Bet expanded their paving block production facility at the location in Kielce by a concrete curing…

Technology

Direct-fired vapor for concrete curing

Temmuz 1, 2014

Vapor is used in the precast concrete industry for the accelerated curing of precast products including concrete pipe, prestressed structural concrete, concrete block, ornamentel concrete,…

Proje

Bruk Bet relies on proven concrete curing quality on its anniversary

Haziran 1, 2014

Bruk Bet is one of the largest Polish manufacturers of decorative concrete blocks and paving stones. The family-run company with several production locations in southeast…

Proje

The Evergreen Line Tunnel Project in Vancouver, Canada

Mart 1, 2014

In late 2013, Vancouver, BC topped the list of most congested cities in North America. On average, peak hour travel time was 36% longer than…

Proje

Quadrix® concrete curing systems integrated into 7 existing concrete block paving plants

Ocak 1, 2014

In the early summer of 2013 a well-known concrete block manufacturer from Central Europe ordered seven Quadrix® II concrete curing systems from the German company…

Proje

Highly flexible production of precast elements for housing and industrial applications

Ağustos 1, 2011

Grupo Cementos de Chihuahua (GCC), Mexico has successfully improved the quality and resistance of their manufactured concrete precast panels. Through their new, customer specific engineered…

Proje

Exceeding expectations

Nisan 1, 2011

“Calstar approached KRAFT because they bring extensive knowledge in curing of a wide range of concrete construction products, including those containing recycled materials, exactly the…

Proje

New curing system for Western Materials, USA

Mart 1, 2009

For over sixty years, Western Materials has been dedicated to providing their customers with quality products including concrete architectural and hardscape products that they manufacture…

Proje

Energy savings

Ağustos 1, 2007

Knife River Corporation recently received the MDU Resources Group, Inc. Einstein Award. These awards are bestowed upon employees of MDU Resources for their process improvement…

Proje

Concrete curing environment for architectural and landscaping products at Northfield Block

Nisan 1, 2007

Northfield Block, an Oldcastle company with locations throughout Illinois, has been in business since 1949. It has built a reputation on aesthetically pleasing and quality…

Proje

Curing of concrete roofing tiles (Hungary)

Şubat 1, 2007

Hungarian company Mediterran Kft. decided to upgrade the aftertreatment system of its main plant at Bóly in the heart of Hungary to a KRAFT Vapor…

Proje

GCC moves to the technological forefront in the construction materials industry

Ocak 1, 2007

When Grupo Cementos Chihuahua, GCC, of Mexico decided to build a new block, paver and architectural products production facility in Juarez, Mexico the decision was…

Proje

Whisper-steam lets precast systems’ neighbours smile

Ocak 1, 2000

Precast Systems Incorporated/Caledonia Concrete Cooperation has recently opened up their new production facility in Allentown, New Jersey, USA. Since the formation of the company in…

News

News

Recent Posts

Archiv

Hakkımızda

Recent News

İletişim

Newsletter