Durcissement Vapor III
DURCISSEMENT VAPOR Pour le béton précontraint et les éléments en béton préfabriqués
A direct-fired vapor generator in conjunction with temperature sensor(s) and motorized vapor control valve(s) accelerates concrete strength gain and increases concrete quality through the controlled addition of heat and humidity. Vapor generators are available in several outputs and heating specifications and burn both natural gas and propane.
Les fonctions
Durcissement Vapor III
Vidéos
Durcissement Vapor III
Animation: Applications of the Vapor Generator
Here you can see very well for which concrete product types the Vapor Generator can be used. In addition, the carousel curing is explained and it is shown what would be an optimal solution here.
Steam Boiler VS Vapor Generator
In this video is explained how a Vapor Generator works and all the advantages of it compared to a steam boiler.
Doublez votre production de blocs de béton
Comparison - Producing Precast Concrete with Steam or Vapor
Here you can see why curing concrete products with Vapor is so much better and more environmentally friendly than with regular steam!
Vapor Generator Flyover
A standard Vapor Generator 35-2S is shown from all sides.
Entretien d'un Vapor Mini
We have always been very precise with our machines.
Flexibilité des Vapor Generators
Different designs of Vapor Generators in their various applications.
Test des Vapor Generator
Test du tuyau du Vapor Generator
Kraft Turtle Diffuser
Animation Vapor Curing précontraintes I Beams
Animation d'un Vapor Re Exhaust
VOS avantages
Durcissement Vapor III
Le durcissement VAPOR accélère le processus de prise
Qualité du béton améliorée par un apport contrôlé de chaleur et d’humidité
Robuste, fiable et durable
Rendement de 98 %
Fonctionnement à basse pression entièrement automatique
Garantie Platine sur la chambre de combustion refroidie à l’eau en modèle V4A
Par rapport à une chaudière à vapeur : rendement supérieur et coûts d’exploitation réduits jusqu’à 60 %
Le durcissement VAPOR réduit les frais de moules
Enregistrement et surveillance des données de durcissement
8 à 10 heures pour les parois préfabriquées et les plafonds, 8 à 10 heures pour les plafonds à corps creux, 16 à 18 heures pour le béton précontraint
Peu encombrant, utilisation simple et sûre
Garantie Platine à vie sur la chambre de combustion
Autres produits Durcissement Vapor III
Kraft Curing
Hot Rocks®
Dégèle et chauffe les granulats gelés. Le fonctionnement et le contrôle sont automatiques.
Tarp Roller
Système de dérouleurs pour bâches. Le système à roues et rails permet de dérouler jusqu’à 120 mètres en seulement 15 minutes.
Tentes Rétractables
La solution rapide, simple et mobile pour le durcissement sur site des éléments en béton préfabriqués.
Système de mesure et de réglage AutoCure®
Mesure de la température du béton et de l’environnement, collecte des données de durcissement, automatisation du processus de durcissement.
Projets
Durcissement Vapor III
Direct-fired vapor for concrete curing
Vapor is used in the precast concrete industry for the accelerated curing of precast products including concrete pipe, prestressed structural concrete, concrete block, ornamentel concrete, cast stone, and assorted precast...En savoir plus
Remote overnight concrete curing for bridge elements
For the densely populated state of New York the Tappan Zee Bridge, crossing the Hudson river north of the city of New York constitutes a vital artery for residents, commuters,...En savoir plus
The Evergreen Line Tunnel Project in Vancouver, Canada
In late 2013, Vancouver, BC topped the list of most congested cities in North America. On average, peak hour travel time was 36% longer than during non-rush hours. … read...En savoir plus
Energy savings
Knife River Corporation recently received the MDU Resources Group, Inc. Einstein Award. These awards are bestowed upon employees of MDU Resources for their process improvement ideas that improve operations and...En savoir plus
Whisper-steam lets precast systems’ neighbours smile
Precast Systems Incorporated/Caledonia Concrete Cooperation has recently opened up their new production facility in Allentown, New Jersey, USA. Since the formation of the company in 1981 they have specialized in...En savoir plus
Documents
Durcissement Vapor III
Vapor 3 Curing | Brochure
VAPOR CURING 3 | ACCELERATED CONCRETE CURING SYSTEM
Vapor 3 Curing | Flyer
VAPOR CURING 3 | ACCELERATED CONCRETE CURING SYSTEM
Contact
Durcissement Vapor III