Match-Cure
Quality Control System
MATCH-CURE allows you to keep an eye on the quality of your concrete elements and make sure they reach the required degree of strength in order to allow for the earliest possible detensioning or demoulding.
Funkcje
Match-Cure
-
Działanie 1
Match-Cure
TEST CYLINDERS filled with fresh concrete taken from the same batch used to produce the concrete element, are placed into the Match-Cure insulated enclosure. AutoCure® measures and controls the test cylinder temperature via a sensor and heater (optional cooler) in the enclosure inside the laboratory; accurately duplicating the temperature of the concrete element outside.
-
Działanie 2
Match-Cure
SENSORS – It is necessary to measure the temperature of the concrete or the concrete curing environment using temperature sensors. Also available are combination temperature sensors with equally important integrated relative humidity probes to measure the relative humidity of the concrete curing environment. We can provide these sensors wired or WIRELESS! Find more information on the sensors here: Datasheet Sensors
-
Działanie 3
Match-Cure
TEMPERATURE DATA from both the concrete element and the test cylinder is/are transmitted to the AutoCure® control system and compared to one another. If the temperature of the concrete elements is greater than that of the test cylinder, the heating system in the enclosure is activated in order to “match” the concrete element temperature.
-
Działanie 4
Match-Cure
EXHAUST VENTILATOR – Should the temperature of the concrete element fall below the temperature of the test cylinder (due to an abrupt decrease in the ambient temperature or as a result of the curing cover being blown away due to wind), an exhaust ventilator in the insulated match-cure enclosure is activated to reduce the temperature.
-
Działanie 5
Match-Cure
COOLING SYSTEM (optional) – In colder regions, where concrete elements may tend to have a lower temperature, an optional cooling system provides for a more controlled temperature reduction (down to 5°C or 40°F) in the enclosure. An unexpected cooling event may trigger an alarm, warning the user about the drop in temperature. This alarm is also available remotely (to a smart divide or PC) with the Access Anywhere option (see next function slide).
-
Działanie 6
Match-Cure
ACCESS ANYWHERE – Monitor the curing process conveniently and remotely: ACCESS ANYWHERE allows quality control/management personnel to remotely monitor the concrete curing process of both the concrete elements and the cylinder from anywhere with an internet connection.
-
Działanie 7
Match-Cure
AUTOCURE® CONTROL – In addition to managing the operation of the Match-Cure system, AutoCure® may be used to control the operation of your Vapor Generator, ThermalCure® System, boiler or other heating source.
-
Działanie 8
Match-Cure
VAPORWARE V2® (optional) – For optimal control we recommend our compact VAPORWARE V2® quality management system, which measures, records, stores and prints all climatic curing data independently of a computer. The interface can be personalised by adding your own logo as well as the date, concrete batch number, element description and number, etc.! Datasheet VaporWare V2®
-
Działanie 9
Match-Cure
STORAGE RACKS for Match-Cure enclosures are also available.
Wideo
Match-Cure
Match-Cure Product Video
Find out How Match-Cure works!
Peace of Mind with Match-Cure Quality Control System
Measure, monitor, manage and verify the de-tensioning and demoulding strength of critical concrete elements with Match-Cure!
Michael Kraft Explains the Match-Cure Ovens!
Twoje korzyści
Match-Cure
Peace of mind – know when your concrete has the strength to detention or demould without breakage – due to accuracy of the provided data
An accessible way of controlling concrete curing quality – overall quality is easier to check by way of the test cylinders
Temperature sensors can be either RTD probes or thermocouple wires for internal concrete temperature measurement in both cylinders and concrete elements
Accurate and remote temperature measurement and detection with wireless temperature sensors and transmitters with 5-year battery life
Precisely matched temperature with internal electric heater heating up to 160°F and optional cooler in Match Cure chamber cooling down to 40°F
Easy integration and optimal control with optional complementary quality management systems VaporWare V2, for data logging, and Access Anywhere, for remote access to your curing data
Works together with AutoCure® Control System via USB input signal from wireless receiver in order to adjust the temperature of the enclosure
CURING EQUIPMENT USED TOGETHER WITH Match-Cure
Kraft Curing
Technika Pomiarowa i Regulacyjna AutoCure®
Automatycznie dokonuje pomiaru i steruje temperaturą i wilgotnością względną w celu uzyskania powtarzalności parametrów procesu pielęgnacji.
Rozsuwane Namioty
Szybkie, proste i niezawodne rozwiązanie do pielęgnacji prefabrykatów betonowych zarówno w hali, jak i na dworze.
Convect-Air®
Kontrolowane doprowadzanie ciepła i stała cyrkulacja powietrza przeznaczone do pielęgnacji w wyższych temperaturach.
Izolowane komory dojrzewania
Przeznaczone do wszystkich systemów do pielęgnacji. Obniżają koszty energii nawet o 50% i zapobiegają kondensacji.
Pielęgnacja Vapor III
Kontrolowane doprowadzanie ciepła i wilgotności. Do elementów z betonu sprężonego oraz prefabrykatów betonowych.
Tarp Roller
System do rozwijania plandek ochronnych. Wydajność systemu kołowo-szynowego wynosi do 120 metrów w ciągu tylko 15 minut.
ThermalCure®
Ciepło promieniowania zapewnia stabilne temperatury bez zakłócania przebiegu procesu produkcji.
Projektowanie
Match-Cure
Pełna kontrola przez cały czas
Interfejs Access Anywhere umożliwia podłączenie się do komory dojrzewania z dowolnego nowoczesnego urządzenia służącego do komunikacji, takiego jak komputer, tablet czy smartfon. Dzięki temu, użytkownicy mają w dowolnym momencie –...Czytaj więcej
Direct-fired vapor for concrete curing
Vapor is used in the precast concrete industry for the accelerated curing of precast products including concrete pipe, prestressed structural concrete, concrete block, ornamentel concrete, cast stone, and assorted precast...Czytaj więcej
Remote overnight concrete curing for bridge elements
For the densely populated state of New York the Tappan Zee Bridge, crossing the Hudson river north of the city of New York constitutes a vital artery for residents, commuters,...Czytaj więcej
The Evergreen Line Tunnel Project in Vancouver, Canada
In late 2013, Vancouver, BC topped the list of most congested cities in North America. On average, peak hour travel time was 36% longer than during non-rush hours. … read...Czytaj więcej
Accelerated Concrete Tunnel Segment Curing for the Albvorland Tunnel
For the Stuttgart-Ulm railway project a new high-speed section is being built from Wendlingen (Neckar) to Ulm alongside the A8 motorway. The new section will offer a fast and convenient...Czytaj więcej
Kontakt
Match-Cure
Mark Kraft
Ameryka Północna, Ameryka Południowa, Australia, Nowa Zelandia, Azja Południowo-Wschodnia
